PRC Board of Chemical Engineering (3 May 1990)

(NAR) VOL. 1 NO.4 / OCTOBER - DECEMBER 1990

[ PRC BOARD OF CHEMICAL ENGINEERING, May 03, 1990 ]

RESOLUTION NO. 28

Pursuant to Section 3 of Republic Act No. 318, known as the Chemical Engineering Law of the Philippines and Section 6 of PD No. 223, as amended, the Board of Chemical Engineering hereby adopts the following Guidelines for the Continuing Professional Education (CPE) Program for registered Chemical Engineers of the Philippines as recommended by the Philippine Institute of Chemical Engineers (PICHE) after consultation with the Board. I Rationale Continuing Professional Education program for Chemical Engineers (CPE-CHE) refers to education and training acquired after getting the license to practice chemical engineering in the Philippines. It aims to update the professional skill and advanced knowledge of chemical engineers. This is in keeping with the engineer’s sacred duty and responsibility to render optimum service to his employer/client, in particular, and the public in general, throughout his professional life. It is therefore the obligation of a chemical engineer to be continuously involved in CPE activities. The CPE-CHE activities include both formal academic pursuits and degrees and the less structured, non-academic activities and programs on technical areas such as process or equipment design, industrial plant installation and operation, systems and energy management, computers, engineering education and other related areas.

II

The CPE-CHE Accreditation To ensure that practicing professional chemical engineers keep up with their profession through continuing professional education, an accreditation and monitoring system has to be set-up and implemented.

A. Responsibility — Since the Philippine Institute of Chemical Engineers (PICHE) is the accredited organization for the chemical engineering profession, it is therefore tasked with the following responsibilities for the attainment of an effective CPE program.

1. The creation of the National Accreditation Committee on Continuing Professional Education for Chemical Engineers.2. Dissemination of information to practitioners of policies governing accreditation of the CPE activities.

3. Initiation of programs of activities that will provide opportunities for practitioners to earn units for accreditation in the CPE-CHE.

4. Support the Board of Chemical Engineering in monitoring the number of units earned by the members in preparation for the renewal of the professional ID card.

B. Criteria — In order to earn units for CPE accreditation, the following requirements shall be satisfied.

1. Topics shall be related to chemical engineering and/or its allied fileds.

2. The scope shall be beyond that of the basic preparation for a baccalaureate degree in chemical engineering.

C. Requirement — A total of twelve (12) credit units per annum or an accumulated thirty-six (36) credit units for three (3) years for the renewal of the professional ID card for the practice chemical engineering. Records of credit units for CPE shall be kept by the Accreditation Committee on an annual basis from January 1 to December 31 of each year and accumulated over a period of three (3) years. Units earned excess of requirement within the specific period may not be carried over to the next renewal period. However, for every thirty (30) excess accumulated units at the time of renewal of license, the license issued shall bear a star of recognition for the practitioner.

III

The National Accreditation Committee The Committee shall be composed of a Chairman and four (4) members of the PICHE and a member of the Board of Chemical Engineers acting as consultant. The members of the Committee shall be appointed by the President of the PICHE for a minimum of three (3) years. The appointee must have at least ten (10) years of professional practice. The Committee functions shall include:

1. Formulate program guidelines for continuing professional education for chemical engineers.

2. Evaluate programs/activities for accreditation.

3. Accredit programs/activities upon request of the PICHE.

4. Accredit seminars, workshops, local conferences, etc. for continuing professional education upon the request ofPICHE Chapters.

5. Monitor and periodically assess program implementation.

6. Review and revise guidelines at least every three (3) years or as arises. The Committee shall meet every quarter at such time and place to be determined by the Chairman. Special meetings may be called by the Chairman or upon the request of members who have served the Committee for at least two (2) years.

IV

Accredited Programs and Activities and Corresponding Units The programs and activities that may be accredited for CPE.

A. ACADEMIC PROGRAMS 1. M.Sc. in Chem. Eng'g. 36 units Ph.D. in Chem. Eng’g. 36 units Note: To be availed of only once.

2. For every nine (9) academic units earned towards M.Sc. Ch.E. 15 units For every six(6) academic units towards Ph.D. 15 units B. TECHNICAL LECTURES AND SEMINARS 1. As lecturer/resource speaker 6 units/session 2. As participant 2 units/session Note: Not to exceed 12 units per lecture or seminar.

C. WORKSHOPS

1. As moderator 4 units/session 2. As participant 2 units/session Note: Not to exceed 12 units per workshop.

D. PICHE NATIONAL/CHAPTER CONVENTION

As delegate 9 units Plus: As speaker 6 units As moderator/reactor 4 unitsE. OTHER LOCAL TECHNOLOGICAL/ PROFESSIONAL CONVENTION As delegate 9 units Plus: As speaker 6 units As moderator/reactor 4 units F.INTERNATIONAL TECHNOLOGICAL/PROFESSIONAL CONVENTION 1. As delegate and speaker 24 units 2. As delegate 12 units G. AUTHORSHIP 1. Book a. As single author- 36 units b. As co-author- 18 units 2. Technical Paper/ Articles (published) a. Single authorship- 15 units b. Major author 9 units c. Junior author 6 units 3. Instructional Materials a. Adopted by technical school 15 units b. In-campus use 10 units c. Laboratory manuals adopted by technical 12 units schools d. Laboratory manuals adopted by for in-campus 8 units use only e. Study guides self-instructional materials, 6 units cassette/video tapes H. PARTICIPATION IN PICHE ACTIVITIES 1. As National Chapter/Officer 12 units 2. As Chairman of PICHE National/ Chapter standing or ad hoc Committee 8 units 3. As member of PICHE National/ Chapter 3 units Committee 3 units 4. As member of PICHE National Chapter

I. EMPLOYMENT

1. Employed as chemical engineer of in chemical engineering related work For one full year duly certified by employer 6 units2. Self Employed in a venture involving chemical engineering know how For one full year duly certified by PICHE 6 units 3. Professor, lecturer or instructor handling professional chemical engineering, science or mathematics subjects For every subject unit per semester/ trimester 2 units duly certified by the school J. RESEARCH 1. Invention patented 36 units 2. Innovation recognized by DOST 12 units 3. Creative Research completed and recognized by DOST 9 units K. AWARDS AND RECOGNITION 1. Awards or recognition given by PICHE National/Chapter 12 units 2. Awards or recognition given by National 18 units Government 9 units 3. Awards or recognition given by Local 4 units Government 36 units 4. Awards or recognition given by Civic Organization 5. International award/recognition as Ch.E.

L. OTHER RELATED TECHNICAL ACTIVITIES SUBJECT TO APPLICATION BY CONCERNED PARTY AND APPROVAL BY ACCREDITATION COMMITTEE 6 units V Exemptions

1. A registered chemical engineer shall be exempted from complying with the CPE upon reaching the age of sixty-five (65) years.

2. Practicing chemical engineers who are outside the country upon presentation of proof/document. The Board, therefore resolved, as it hereby resolves, that upon approval of this resolution and after fifteen days following its publication in the Official Gazette starting January, 1991, aChemical Engineer will be required to submit 12 credit units every year or a total of 36 units for 3 years for renewal of her/his professional I.D. card.

VI

Effectivity These rules shall become effective upon approval by the Commission and after fifteen (15) days following its publication in the Official Gazette. Adopted: 3 May 1990

(SGD.) ALBERTO S. MUYOT Chairman

(SGD.) LYDIA G. TANSINSIN (SGD.) ZINNIA P. TERU Member Member

Approved:

(SGD.) JULIO B. FRANCIA, JR. Commissioner

(SGD.) NILO C. MARIANO (SGD.) MARIANO A. MENDIETA Associate Commissioner Associate Commissioner